Pressure using Enthalpy, Internal Energy and Volume Solution

STEP 0: Pre-Calculation Summary
Formula Used
Pressure = (Enthalpy-Internal Energy)/Volume
P = (H-U)/VT
This formula uses 4 Variables
Variables Used
Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Enthalpy - (Measured in Joule) - Enthalpy is the thermodynamic quantity equivalent to the total heat content of a system.
Internal Energy - (Measured in Joule) - The internal energy of a thermodynamic system is the energy contained within it. It is the energy necessary to create or prepare the system in any given internal state.
Volume - (Measured in Cubic Meter) - Volume is the amount of space that a substance or object occupies or that is enclosed within a container.
STEP 1: Convert Input(s) to Base Unit
Enthalpy: 1.51 Kilojoule --> 1510 Joule (Check conversion here)
Internal Energy: 1.21 Kilojoule --> 1210 Joule (Check conversion here)
Volume: 63 Cubic Meter --> 63 Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = (H-U)/VT --> (1510-1210)/63
Evaluating ... ...
P = 4.76190476190476
STEP 3: Convert Result to Output's Unit
4.76190476190476 Pascal --> No Conversion Required
FINAL ANSWER
4.76190476190476 4.761905 Pascal <-- Pressure
(Calculation completed in 00.004 seconds)

Credits

Created by Shivam Sinha
National Institute Of Technology (NIT), Surathkal
Shivam Sinha has created this Calculator and 300+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

12 Thermodynamic Property Relations Calculators

Temperature using Gibbs Free Energy, Enthalpy and Entropy
Go Temperature = modulus((Enthalpy-Gibbs Free Energy)/Entropy)
Temperature using Helmholtz Free Energy, Internal Energy and Entropy
Go Temperature = (Internal Energy-Helmholtz Free Energy)/Entropy
Entropy using Helmholtz Free Energy, Internal Energy and Temperature
Go Entropy = (Internal Energy-Helmholtz Free Energy)/Temperature
Helmholtz Free Energy using Internal Energy, Temperature and Entropy
Go Helmholtz Free Energy = Internal Energy-Temperature*Entropy
Internal Energy using Helmholtz Free Energy, Temperature and Entropy
Go Internal Energy = Helmholtz Free Energy+Temperature*Entropy
Entropy using Gibbs Free Energy, Enthalpy and Temperature
Go Entropy = (Enthalpy-Gibbs Free Energy)/Temperature
Gibbs Free Energy using Enthalpy, Temperature and Entropy
Go Gibbs Free Energy = Enthalpy-Temperature*Entropy
Enthalpy using Gibbs Free Energy, Temperature and Entropy
Go Enthalpy = Gibbs Free Energy+Temperature*Entropy
Pressure using Enthalpy, Internal Energy and Volume
Go Pressure = (Enthalpy-Internal Energy)/Volume
Volume using Enthalpy, Internal Energy and Pressure
Go Volume = (Enthalpy-Internal Energy)/Pressure
Enthalpy using Internal Energy, Pressure and Volume
Go Enthalpy = Internal Energy+Pressure*Volume
Internal Energy using Enthalpy, Pressure and Volume
Go Internal Energy = Enthalpy-Pressure*Volume

Pressure using Enthalpy, Internal Energy and Volume Formula

Pressure = (Enthalpy-Internal Energy)/Volume
P = (H-U)/VT

What is Enthalpy?

Enthalpy is a property of a thermodynamic system, defined as the sum of the system's internal energy and the product of its pressure and volume. As a state function, enthalpy depends only on the final configuration of internal energy, pressure, and volume, not on the path taken to achieve it.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Pressure using Enthalpy, Internal Energy and Volume?

Pressure using Enthalpy, Internal Energy and Volume calculator uses Pressure = (Enthalpy-Internal Energy)/Volume to calculate the Pressure, The Pressure using Enthalpy, Internal Energy and Volume formula is defined as the ratio of the difference of enthalpy and internal energy to the volume. Pressure is denoted by P symbol.

How to calculate Pressure using Enthalpy, Internal Energy and Volume using this online calculator? To use this online calculator for Pressure using Enthalpy, Internal Energy and Volume, enter Enthalpy (H), Internal Energy (U) & Volume (VT) and hit the calculate button. Here is how the Pressure using Enthalpy, Internal Energy and Volume calculation can be explained with given input values -> 4.761905 = (1510-1210)/63.

FAQ

What is Pressure using Enthalpy, Internal Energy and Volume?
The Pressure using Enthalpy, Internal Energy and Volume formula is defined as the ratio of the difference of enthalpy and internal energy to the volume and is represented as P = (H-U)/VT or Pressure = (Enthalpy-Internal Energy)/Volume. Enthalpy is the thermodynamic quantity equivalent to the total heat content of a system, The internal energy of a thermodynamic system is the energy contained within it. It is the energy necessary to create or prepare the system in any given internal state & Volume is the amount of space that a substance or object occupies or that is enclosed within a container.
How to calculate Pressure using Enthalpy, Internal Energy and Volume?
The Pressure using Enthalpy, Internal Energy and Volume formula is defined as the ratio of the difference of enthalpy and internal energy to the volume is calculated using Pressure = (Enthalpy-Internal Energy)/Volume. To calculate Pressure using Enthalpy, Internal Energy and Volume, you need Enthalpy (H), Internal Energy (U) & Volume (VT). With our tool, you need to enter the respective value for Enthalpy, Internal Energy & Volume and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!