Reference Tool Life given Production Cost per Component Solution

STEP 0: Pre-Calculation Summary
Formula Used
Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))
Tref = ((K/(Vref^(1/n)))*(M*tc+Ct)*(V^((1-n)/n)))/(Cpr-M*(NPT+(K/V)))
This formula uses 10 Variables
Variables Used
Reference Tool Life - (Measured in Second) - Reference Tool Life is the Tool Life of the tool obtained in the reference Machining Condition.
Constant For Machining Condition - (Measured in Meter) - Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition. It is usually measured in "Metre".
Reference Cutting Velocity - (Measured in Meter per Second) - Reference Cutting Velocity is the Cutting Velocity of the tool used in the reference Machining Condition.
Taylor's Tool Life Exponent - Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of Tool Wear.
Machining and Operating Rate - Machining and Operating Rate is the money charged for processing on and operating machines per unit time, including overheads.
Time to Change One Tool - (Measured in Second) - Time to Change One Tool is the measure of time it takes to change one tool during machining.
Cost of a Tool - The Cost of a Tool is simply the cost of one tool being used for machining.
Cutting Velocity - (Measured in Meter per Second) - The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Production Cost of Each Component - Production Cost of Each Component is the total amount that it takes to produce a single component from scratch.
Non-Productive Time - (Measured in Second) - Non-Productive Time is the total time wasted in setting up the machine or workpiece for a particular process.
STEP 1: Convert Input(s) to Base Unit
Constant For Machining Condition: 186.0331 Meter --> 186.0331 Meter No Conversion Required
Reference Cutting Velocity: 0.76 Meter per Second --> 0.76 Meter per Second No Conversion Required
Taylor's Tool Life Exponent: 0.125 --> No Conversion Required
Machining and Operating Rate: 0.00283 --> No Conversion Required
Time to Change One Tool: 5 Minute --> 300 Second (Check conversion here)
Cost of a Tool: 100 --> No Conversion Required
Cutting Velocity: 0.28 Meter per Second --> 0.28 Meter per Second No Conversion Required
Production Cost of Each Component: 5.655323 --> No Conversion Required
Non-Productive Time: 20 Minute --> 1200 Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Tref = ((K/(Vref^(1/n)))*(M*tc+Ct)*(V^((1-n)/n)))/(Cpr-M*(NPT+(K/V))) --> ((186.0331/(0.76^(1/0.125)))*(0.00283*300+100)*(0.28^((1-0.125)/0.125)))/(5.655323-0.00283*(1200+(186.0331/0.28)))
Evaluating ... ...
Tref = 60.0000313326037
STEP 3: Convert Result to Output's Unit
60.0000313326037 Second --> No Conversion Required
FINAL ANSWER
60.0000313326037 โ‰ˆ 60.00003 Second <-- Reference Tool Life
(Calculation completed in 00.004 seconds)

Credits

Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verified by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has verified this Calculator and 400+ more calculators!

10+ Production Cost per Component Calculators

Machining and Operating Rate given Production Cost per Component
Go Machining and Operating Rate = (Production Cost of Each Component-((Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent))))/(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*Time to Change One Tool*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))
Tool Changing Time for each Tool given Production Cost per Component
Go Time to Change One Tool = (((Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))/((Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent))))-Cost of a Tool)/Machining and Operating Rate
Cost of each Tool given Production Cost per Component
Go Cost of a Tool = ((Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))/((Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent))))-(Time to Change One Tool*Machining and Operating Rate)
Reference Tool Life given Production Cost per Component
Go Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))
Constant for Machining Operation given Production Cost per Component
Go Constant For Machining Condition = (Production Cost of Each Component-Machining and Operating Rate*Non-Productive Time)/(Machining and Operating Rate*(1/Cutting Velocity)+(1/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))
Production Cost per Component in Constant-Cutting-Speed, Rough-Machining Operation
Go Production Cost of Each Component = Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent))
Reference Cutting Speed given Production Cost per Component
Go Reference Cutting Velocity = (((Constant For Machining Condition/Reference Tool Life)*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))))^Taylor's Tool Life Exponent
Taylor's Tool Life Constant given Production Cost per Component
Go Taylor's Tool Life Exponent = ln(Cutting Velocity/Reference Cutting Velocity)/ln(Reference Tool Life*Cutting Velocity*(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))/(Constant For Machining Condition*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)))
Nonproductive Time given Production Cost per Component
Go Setup Time = (Production Cost of Each Component-((Machining and Operating Rate*Constant For Machining Condition/Cutting Velocity)+(Constant For Machining Condition*((Cutting Velocity/Reference Cutting Velocity)^(1/Taylor's Tool Life Exponent))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)/(Reference Tool Life*Cutting Velocity))))/Machining and Operating Rate
Production Cost per Component for Constant-Speed-Rough-Machining given Tool Changing Cost
Go Production Cost of Each Component = Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))+(Constant For Machining Condition/(Reference Tool Life*Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Cost of changing each Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent))

Reference Tool Life given Production Cost per Component Formula

Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity)))
Tref = ((K/(Vref^(1/n)))*(M*tc+Ct)*(V^((1-n)/n)))/(Cpr-M*(NPT+(K/V)))

What is Reference Machining Condition?

Reference Machining Condition is usually a state of Machining Operation which has been idealized as the most suitable. It is used to draw a comparison between different other Machining Conditions.

How to Calculate Reference Tool Life given Production Cost per Component?

Reference Tool Life given Production Cost per Component calculator uses Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))) to calculate the Reference Tool Life, The Reference Tool Life given Production Cost per Component is a method to determine the optimal Tool Sharpening period required for a known Cutting Velocity in reference machining condition to manufacture a single component. Reference Tool Life is denoted by Tref symbol.

How to calculate Reference Tool Life given Production Cost per Component using this online calculator? To use this online calculator for Reference Tool Life given Production Cost per Component, enter Constant For Machining Condition (K), Reference Cutting Velocity (Vref), Taylor's Tool Life Exponent (n), Machining and Operating Rate (M), Time to Change One Tool (tc), Cost of a Tool (Ct), Cutting Velocity (V), Production Cost of Each Component (Cpr) & Non-Productive Time (NPT) and hit the calculate button. Here is how the Reference Tool Life given Production Cost per Component calculation can be explained with given input values -> 60.00003 = ((186.0331/(0.76^(1/0.125)))*(0.00283*300+100)*(0.28^((1-0.125)/0.125)))/(5.655323-0.00283*(1200+(186.0331/0.28))).

FAQ

What is Reference Tool Life given Production Cost per Component?
The Reference Tool Life given Production Cost per Component is a method to determine the optimal Tool Sharpening period required for a known Cutting Velocity in reference machining condition to manufacture a single component and is represented as Tref = ((K/(Vref^(1/n)))*(M*tc+Ct)*(V^((1-n)/n)))/(Cpr-M*(NPT+(K/V))) or Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))). Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition. It is usually measured in "Metre", Reference Cutting Velocity is the Cutting Velocity of the tool used in the reference Machining Condition, Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of Tool Wear, Machining and Operating Rate is the money charged for processing on and operating machines per unit time, including overheads, Time to Change One Tool is the measure of time it takes to change one tool during machining, The Cost of a Tool is simply the cost of one tool being used for machining, The Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating), Production Cost of Each Component is the total amount that it takes to produce a single component from scratch & Non-Productive Time is the total time wasted in setting up the machine or workpiece for a particular process.
How to calculate Reference Tool Life given Production Cost per Component?
The Reference Tool Life given Production Cost per Component is a method to determine the optimal Tool Sharpening period required for a known Cutting Velocity in reference machining condition to manufacture a single component is calculated using Reference Tool Life = ((Constant For Machining Condition/(Reference Cutting Velocity^(1/Taylor's Tool Life Exponent)))*(Machining and Operating Rate*Time to Change One Tool+Cost of a Tool)*(Cutting Velocity^((1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)))/(Production Cost of Each Component-Machining and Operating Rate*(Non-Productive Time+(Constant For Machining Condition/Cutting Velocity))). To calculate Reference Tool Life given Production Cost per Component, you need Constant For Machining Condition (K), Reference Cutting Velocity (Vref), Taylor's Tool Life Exponent (n), Machining and Operating Rate (M), Time to Change One Tool (tc), Cost of a Tool (Ct), Cutting Velocity (V), Production Cost of Each Component (Cpr) & Non-Productive Time (NPT). With our tool, you need to enter the respective value for Constant For Machining Condition, Reference Cutting Velocity, Taylor's Tool Life Exponent, Machining and Operating Rate, Time to Change One Tool, Cost of a Tool, Cutting Velocity, Production Cost of Each Component & Non-Productive Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!