Retention Time given Number of Theoretical Plates and Width of Peak Solution

STEP 0: Pre-Calculation Summary
Formula Used
Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates))
tNP_WP = (w/4)*(sqrt(N))
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Retention Time given NP and WP - (Measured in Second) - Retention Time given NP and WP is defined as the time taken by the solute to move over the stationary phase and to come out of the column.
Width of Peak - (Measured in Second) - The Width of Peak is defined as the total distance of the base of the peak.
Number of Theoretical Plates - The Number of Theoretical Plates is defined as used to determine column efficiency based on the calculation in which the larger the theoretical plate number the sharper the peaks.
STEP 1: Convert Input(s) to Base Unit
Width of Peak: 3.1 Second --> 3.1 Second No Conversion Required
Number of Theoretical Plates: 10 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tNP_WP = (w/4)*(sqrt(N)) --> (3.1/4)*(sqrt(10))
Evaluating ... ...
tNP_WP = 2.45076518663049
STEP 3: Convert Result to Output's Unit
2.45076518663049 Second --> No Conversion Required
FINAL ANSWER
2.45076518663049 2.450765 Second <-- Retention Time given NP and WP
(Calculation completed in 00.004 seconds)

Credits

Created by Prashant Singh
K J Somaiya College of science (K J Somaiya), Mumbai
Prashant Singh has created this Calculator and 700+ more calculators!
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

10+ Retention Time Calculators

Retention Time given Number of Theoretical Plate and Half Width of Peak
Go Retention Time given NP and HP = (Half of Average Width of Peaks)*(sqrt(Number of Theoretical Plates/5.55))
Half Width of Peak given Number of Theoretical Plates and Retention Time
Go Half of Average Width of Peaks = (sqrt(5.55/Number of Theoretical Plates))*(Retention Time)
Retention Time given Number of Theoretical Plates and Standard Deviation
Go Retention Time given NP and SD = (Standard Deviation)*(sqrt(Number of Theoretical Plates))
Retention Time given Number of Theoretical Plates and Width of Peak
Go Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates))
Width of Peak given Number of Theoretical Plates and Retention Time
Go Width of Peak NP and RT = (4*Retention Time)/(sqrt(Count of Theoretical Plates))
Retention Time given Capacity Factor
Go Retention Time given CF = Unretained Solute Travel Time*(Capacity Factor for Analytical+1)
Retention Time given Adjusted Retention Time
Go Retention Time given ART = (Adjusted Retention Time+Unretained Solute Travel Time)
Adjusted Retention Time given Retention Time
Go Adjusted Retention Time given RT = (Retention Time-Unretained Solute Travel Time)
Average Width of Peak given Resolution and Change in Retention Time
Go Average Width of Peaks given RT = (Change in Retention Time/Resolution)
Retention Time given Retention Volume
Go Retention Time given RV = (Retention Volume/Flow Rate of Mobile Phase)

Retention Time given Number of Theoretical Plates and Width of Peak Formula

Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates))
tNP_WP = (w/4)*(sqrt(N))

What is Chromatography?

A separation process based on the various partitioning coefficients of different solutes between the two phases.
Involving the interaction of solute(s) and two phases
Mobile phase: A gas or liquid that moves through the column.
Stationary phase: A solid or liquid that remains in place.

What are the types of Chromatography?

1) Adsorption chromatography
2) Ion-exchange chromatography
3) Partition chromatography
4) Molecular Size exclusion chromatography
5) Affinity chromatography

How to Calculate Retention Time given Number of Theoretical Plates and Width of Peak?

Retention Time given Number of Theoretical Plates and Width of Peak calculator uses Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates)) to calculate the Retention Time given NP and WP, The Retention Time given Number of Theoretical Plates and Width of Peak formula is defined as the product of one-fourth of the width of peak to the square root of a number of the theoretical plates. Retention Time given NP and WP is denoted by tNP_WP symbol.

How to calculate Retention Time given Number of Theoretical Plates and Width of Peak using this online calculator? To use this online calculator for Retention Time given Number of Theoretical Plates and Width of Peak, enter Width of Peak (w) & Number of Theoretical Plates (N) and hit the calculate button. Here is how the Retention Time given Number of Theoretical Plates and Width of Peak calculation can be explained with given input values -> 2.450765 = (3.1/4)*(sqrt(10)).

FAQ

What is Retention Time given Number of Theoretical Plates and Width of Peak?
The Retention Time given Number of Theoretical Plates and Width of Peak formula is defined as the product of one-fourth of the width of peak to the square root of a number of the theoretical plates and is represented as tNP_WP = (w/4)*(sqrt(N)) or Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates)). The Width of Peak is defined as the total distance of the base of the peak & The Number of Theoretical Plates is defined as used to determine column efficiency based on the calculation in which the larger the theoretical plate number the sharper the peaks.
How to calculate Retention Time given Number of Theoretical Plates and Width of Peak?
The Retention Time given Number of Theoretical Plates and Width of Peak formula is defined as the product of one-fourth of the width of peak to the square root of a number of the theoretical plates is calculated using Retention Time given NP and WP = (Width of Peak/4)*(sqrt(Number of Theoretical Plates)). To calculate Retention Time given Number of Theoretical Plates and Width of Peak, you need Width of Peak (w) & Number of Theoretical Plates (N). With our tool, you need to enter the respective value for Width of Peak & Number of Theoretical Plates and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!