What is Rms Value of Load current of Three Phase Uncontrolled Rectifier ?
The RMS (Root Mean Square) value of the load current in an uncontrolled rectifier depends on the configuration of the rectifier, the input voltage, and the load. The RMS current can be calculated based on the rectifier type and load. The peak value of the load current depends on the type of AC source, the load, and the configuration of the rectifier. If you know the peak or peak-to-peak load current, you can use that value directly.
How to Calculate RMS Load Current of Three Phase Uncontrolled Rectifier?
RMS Load Current of Three Phase Uncontrolled Rectifier calculator uses Root Mean Square Current = (Winding Ratio*Peak Input Voltage)/
(Load Resistance*sqrt(2))*sqrt(1+(3*sqrt(3))/(2*pi)) to calculate the Root Mean Square Current, RMS Load Current of Three Phase Uncontrolled Rectifier is important because it is the current that is seen by the load circuit. It is also the current that is used to calculate the power delivered to the load. The RMS value of the load current of an uncontrolled rectifier is always higher than the average load current. This is because the load current of an uncontrolled rectifier is a pulsating DC current with a ripple current superimposed on it. The ripple current is the AC component of the load current, and it is caused by the fact that the rectified sinusoidal waveform is not a pure DC waveform. Root Mean Square Current is denoted by I_{rms} symbol.
How to calculate RMS Load Current of Three Phase Uncontrolled Rectifier using this online calculator? To use this online calculator for RMS Load Current of Three Phase Uncontrolled Rectifier, enter Winding Ratio (n), Peak Input Voltage (V_{max}) & Load Resistance (R_{L}) and hit the calculate button. Here is how the RMS Load Current of Three Phase Uncontrolled Rectifier calculation can be explained with given input values -> 451.222 = (15*220)/
(6.99*sqrt(2))*sqrt(1+(3*sqrt(3))/(2*pi)).