RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Root Mean Square Current = 0.4854*Peak Phase Current
Irms = 0.4854*Im(phase)
This formula uses 2 Variables
Variables Used
Root Mean Square Current - (Measured in Ampere) - Root Mean Square Current is defined as the root mean square of current flowing through a rectifier circuit.
Peak Phase Current - (Measured in Ampere) - Peak Phase Current is the maximum amplitude of the current acquired by any phase of a 3 phase system.
STEP 1: Convert Input(s) to Base Unit
Peak Phase Current: 4.105 Ampere --> 4.105 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Irms = 0.4854*Im(phase) --> 0.4854*4.105
Evaluating ... ...
Irms = 1.992567
STEP 3: Convert Result to Output's Unit
1.992567 Ampere --> No Conversion Required
FINAL ANSWER
1.992567 Ampere <-- Root Mean Square Current
(Calculation completed in 00.004 seconds)

Credits

Created by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has created this Calculator and 100+ more calculators!
Verified by Rachita C
BMS College Of Engineering (BMSCE), Banglore
Rachita C has verified this Calculator and 50+ more calculators!

6 Half Wave Calculators

Average Output Voltage of Three Phase Half Wave Diode Rectifier with R Load in Phase Voltage Terms
Go Average Output Voltage = ((3*sqrt(3))/(2*pi))*Peak Phase Voltage
Average Output Power of Three Phase Half Wave Diode Rectifier with R Load
Go Average Output Power = 0.684*Peak Phase Voltage*Peak Phase Current
Average Output Voltage of Three Phase Half Wave Diode Rectifier with R Load in Line Voltage Terms
Go Average Output Voltage = (3/(2*pi))*Peak Line Voltage
RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load
Go Root Mean Square Current = 0.4854*Peak Phase Current
RMS Output Voltage of Three Phase Half Wave Diode Rectifier with Resistive Load
Go RMS Output Voltage = 0.84068*Peak Phase Voltage
Ripple Voltage of Three Phase Half Wave Diode Rectifier
Go Ripple Voltage = 0.151*Peak Phase Voltage

RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load Formula

Root Mean Square Current = 0.4854*Peak Phase Current
Irms = 0.4854*Im(phase)

How are RMS values different from average values?

The average of all the instantaneous values of an alternating voltage and currents over one complete cycle is called Average Value. The work is done by both, positive and negative cycle and hence the average value is determined without considering the signs. When current flows through a resistor of known resistance for a given period of time than as a result the same quantity of heat is produced by the alternating current when flows through the same resistor for the same period of time is called R.M.S or effective value of the alternating current.

How to Calculate RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load?

RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load calculator uses Root Mean Square Current = 0.4854*Peak Phase Current to calculate the Root Mean Square Current, The RMS output current of three phase half wave diode rectifier with R load in formula is defined as the RMS value of current on the load side of a phase rectifier over a complete cycle when the load is resistive in nature. Root Mean Square Current is denoted by Irms symbol.

How to calculate RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load using this online calculator? To use this online calculator for RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load, enter Peak Phase Current (Im(phase)) and hit the calculate button. Here is how the RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load calculation can be explained with given input values -> 1.992567 = 0.4854*4.105.

FAQ

What is RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load?
The RMS output current of three phase half wave diode rectifier with R load in formula is defined as the RMS value of current on the load side of a phase rectifier over a complete cycle when the load is resistive in nature and is represented as Irms = 0.4854*Im(phase) or Root Mean Square Current = 0.4854*Peak Phase Current. Peak Phase Current is the maximum amplitude of the current acquired by any phase of a 3 phase system.
How to calculate RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load?
The RMS output current of three phase half wave diode rectifier with R load in formula is defined as the RMS value of current on the load side of a phase rectifier over a complete cycle when the load is resistive in nature is calculated using Root Mean Square Current = 0.4854*Peak Phase Current. To calculate RMS Output Current of Three Phase Half Wave Diode Rectifier with R Load, you need Peak Phase Current (Im(phase)). With our tool, you need to enter the respective value for Peak Phase Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!