Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species Solution

STEP 0: Pre-Calculation Summary
Formula Used
Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor)
Psat = fl/(ϕsat*P.F.)
This formula uses 4 Variables
Variables Used
Saturated Pressure - (Measured in Pascal) - Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.
Fugacity of Liquid Phase Species - (Measured in Pascal) - Fugacity of Liquid Phase Species is denoted by fl symbol.
Saturated Fugacity Coefficient of Species - Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species.
Poynting Factor - Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.
STEP 1: Convert Input(s) to Base Unit
Fugacity of Liquid Phase Species: 17 Pascal --> 17 Pascal No Conversion Required
Saturated Fugacity Coefficient of Species: 0.13 --> No Conversion Required
Poynting Factor: 100 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Psat = fl/(ϕsat*P.F.) --> 17/(0.13*100)
Evaluating ... ...
Psat = 1.30769230769231
STEP 3: Convert Result to Output's Unit
1.30769230769231 Pascal --> No Conversion Required
FINAL ANSWER
1.30769230769231 1.307692 Pascal <-- Saturated Pressure
(Calculation completed in 00.004 seconds)

Credits

Created by Shivam Sinha
National Institute Of Technology (NIT), Surathkal
Shivam Sinha has created this Calculator and 300+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

7 Fugacity and Fugacity Coefficient Calculators

Saturated Fugacity Coeff. using Poynting Factor Correlation and Fugacity of Liq. Phase Species
Go Saturated Fugacity Coefficient of Species = Fugacity of Liquid Phase Species/(Saturated Pressure*exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature)))
Fugacity of Liq. Phase Species using Poynting Factor Correlation
Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*exp((Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))
Poynting Factor
Go Poynting Factor = exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))
Saturated Fugacity Coeff. using Poynting Factor and Fugacity of Liq. Phase Species
Go Saturated Fugacity Coefficient of Species = Fugacity of Liquid Phase Species/(Saturated Pressure*Poynting Factor)
Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species
Go Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure)
Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species
Go Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor)
Fugacity of Liq. Phase Species using Poynting Factor
Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor

Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species Formula

Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor)
Psat = fl/(ϕsat*P.F.)

What is Poynting Factor?

The Poynting effect generally refers to the change in the fugacity of a liquid when a non-condensable gas is mixed with the vapor at saturated conditions. at high pressure while remaining in the gaseous form is due to the Poynting effect. The Poynting factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species?

Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species calculator uses Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor) to calculate the Saturated Pressure, The Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species formula is defined as the function of fugacity of the liquid phase of a species, saturated fugacity coefficient of a species and poynting factor. Saturated Pressure is denoted by Psat symbol.

How to calculate Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species using this online calculator? To use this online calculator for Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species, enter Fugacity of Liquid Phase Species (fl), Saturated Fugacity Coefficient of Species sat) & Poynting Factor (P.F.) and hit the calculate button. Here is how the Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species calculation can be explained with given input values -> 1.307692 = 17/(0.13*100).

FAQ

What is Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species?
The Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species formula is defined as the function of fugacity of the liquid phase of a species, saturated fugacity coefficient of a species and poynting factor and is represented as Psat = fl/(ϕsat*P.F.) or Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor). Fugacity of Liquid Phase Species is denoted by fl symbol, Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species & Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.
How to calculate Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species?
The Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species formula is defined as the function of fugacity of the liquid phase of a species, saturated fugacity coefficient of a species and poynting factor is calculated using Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor). To calculate Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species, you need Fugacity of Liquid Phase Species (fl), Saturated Fugacity Coefficient of Species sat) & Poynting Factor (P.F.). With our tool, you need to enter the respective value for Fugacity of Liquid Phase Species, Saturated Fugacity Coefficient of Species & Poynting Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!