Specific Surface Area for Thin Rod Solution

STEP 0: Pre-Calculation Summary
Formula Used
Specific Surface Area = (2/Density)*(1/Cylinder Radius)
Asp = (2/ρ)*(1/Rcyl)
This formula uses 3 Variables
Variables Used
Specific Surface Area - (Measured in Square Meter per Kilogram) - Specific Surface Area is determined as the ratio of the area divided by the mass of an array of particles.
Density - (Measured in Kilogram per Cubic Meter) - The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Cylinder Radius - (Measured in Meter) - The Cylinder Radius is the radius of its base.
STEP 1: Convert Input(s) to Base Unit
Density: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Cylinder Radius: 0.025 Meter --> 0.025 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Asp = (2/ρ)*(1/Rcyl) --> (2/997)*(1/0.025)
Evaluating ... ...
Asp = 0.0802407221664995
STEP 3: Convert Result to Output's Unit
0.0802407221664995 Square Meter per Kilogram --> No Conversion Required
FINAL ANSWER
0.0802407221664995 0.080241 Square Meter per Kilogram <-- Specific Surface Area
(Calculation completed in 00.004 seconds)

Credits

Created by Pratibha
Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India
Pratibha has created this Calculator and 100+ more calculators!
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

8 Specific Surface Area Calculators

Surface Enthalpy given Critical Temperature
Go Surface Enthalpy = (Constant for each Liquid)*(1-(Temperature/Critical Temperature))^(Empirical Factor-1)*(1+((Empirical Factor-1)*(Temperature/Critical Temperature)))
Surface Entropy given Critical Temperature
Go Surface Entropy = Empirical Factor*Constant for each Liquid*(1-(Temperature/Critical Temperature))^(Empirical Factor)-(1/Critical Temperature)
Specific Surface Area for array of n Cylindrical Particles
Go Specific Surface Area = (2/Density)*((1/Cylinder Radius)+(1/Length))
Change in Surface Potential
Go Change in Surface Potential = Surface Potential of Monolayer-Surface Potential of Clean Surface
Surface Viscosity
Go Surface Viscosity = Dynamic Viscosity/Thickness of Surface Phase
Specific Surface Area for Thin Rod
Go Specific Surface Area = (2/Density)*(1/Cylinder Radius)
Specific Surface Area
Go Specific Surface Area = 3/(Density*Radius of Sphere)
Specific Surface Area for Flat Disk
Go Specific Surface Area = (2/Density)*(1/Length)

Specific Surface Area for Thin Rod Formula

Specific Surface Area = (2/Density)*(1/Cylinder Radius)
Asp = (2/ρ)*(1/Rcyl)

What is Specific Surface Area?

Specific Surface Area is determined as the ratio of the area divided by the mass of an array of particles. For a fixed amount of material, the surface area is inversely proportional to the radius for uniform, spherical particles.

How to Calculate Specific Surface Area for Thin Rod?

Specific Surface Area for Thin Rod calculator uses Specific Surface Area = (2/Density)*(1/Cylinder Radius) to calculate the Specific Surface Area, The Specific Surface Area for Thin Rod formula is defined as the total area per total mass when the length is very smaller than the radius of the cylinder. Specific Surface Area is denoted by Asp symbol.

How to calculate Specific Surface Area for Thin Rod using this online calculator? To use this online calculator for Specific Surface Area for Thin Rod, enter Density (ρ) & Cylinder Radius (Rcyl) and hit the calculate button. Here is how the Specific Surface Area for Thin Rod calculation can be explained with given input values -> 0.080241 = (2/997)*(1/0.025).

FAQ

What is Specific Surface Area for Thin Rod?
The Specific Surface Area for Thin Rod formula is defined as the total area per total mass when the length is very smaller than the radius of the cylinder and is represented as Asp = (2/ρ)*(1/Rcyl) or Specific Surface Area = (2/Density)*(1/Cylinder Radius). The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object & The Cylinder Radius is the radius of its base.
How to calculate Specific Surface Area for Thin Rod?
The Specific Surface Area for Thin Rod formula is defined as the total area per total mass when the length is very smaller than the radius of the cylinder is calculated using Specific Surface Area = (2/Density)*(1/Cylinder Radius). To calculate Specific Surface Area for Thin Rod, you need Density (ρ) & Cylinder Radius (Rcyl). With our tool, you need to enter the respective value for Density & Cylinder Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Specific Surface Area?
In this formula, Specific Surface Area uses Density & Cylinder Radius. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Specific Surface Area = (2/Density)*(1/Length)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!