Surface Tension of Soap Bubble Solution

STEP 0: Pre-Calculation Summary
Formula Used
Surface Tensions = Pressure Changes*Diameter of Droplet/8
σchange = Δp*d/8
This formula uses 3 Variables
Variables Used
Surface Tensions - (Measured in Newton per Meter) - Surface Tensions is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Pressure Changes - (Measured in Pascal) - Pressure changes is the difference between the pressure inside the liquid droplet and atmospheric pressure.
Diameter of Droplet - (Measured in Meter) - Diameter of droplet is the length of the longest chord of the liquid droplet.
STEP 1: Convert Input(s) to Base Unit
Pressure Changes: 3.36 Pascal --> 3.36 Pascal No Conversion Required
Diameter of Droplet: 121 Centimeter --> 1.21 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σchange = Δp*d/8 --> 3.36*1.21/8
Evaluating ... ...
σchange = 0.5082
STEP 3: Convert Result to Output's Unit
0.5082 Newton per Meter --> No Conversion Required
FINAL ANSWER
0.5082 Newton per Meter <-- Surface Tensions
(Calculation completed in 00.004 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

25 Pressure Relations Calculators

Depth of Centroid given Center of Pressure
Go Depth of Centroid = (Center of Pressure*Surface area+sqrt((Center of Pressure*Surface area)^2+4*Surface area*Moment of Inertia))/(2*Surface area)
Center of Pressure on Inclined Plane
Go Center of Pressure = Depth of Centroid+(Moment of Inertia*sin(Angle)*sin(Angle))/(Wet Surface Area*Depth of Centroid)
Differential Pressure-Differential Manometer
Go Pressure Changes = Specific weight 2*Height of Column 2+Specific Weight of Manometer liquid*Height of Manometer Liquid-Specific Weight 1*Height of Column 1
Area of Surface Wetted given Center of Pressure
Go Wet Surface Area = Moment of Inertia/((Center of Pressure-Depth of Centroid)*Depth of Centroid)
Height of Fluid 1 given Differential Pressure between Two Points
Go Height of Column 1 = (Pressure Changes+Specific weight 2*Height of Column 2)/Specific Weight 1
Height of Fluid 2 given Differential Pressure between Two Points
Go Height of Column 2 = (Specific Weight 1*Height of Column 1-Pressure Changes)/Specific weight 2
Moment of Inertia of Centroid given Center of Pressure
Go Moment of Inertia = (Center of Pressure-Depth of Centroid)*Wet Surface Area*Depth of Centroid
Center of Pressure
Go Center of Pressure = Depth of Centroid+Moment of Inertia/(Wet Surface Area*Depth of Centroid)
Differential Pressure between Two Points
Go Pressure Changes = Specific Weight 1*Height of Column 1-Specific weight 2*Height of Column 2
Angle of Inclined Manometer given Pressure at Point
Go Angle = asin(Pressure on Point/Specific Weight 1*Length of Inclined Manometer)
Length of Inclined Manometer
Go Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle))
Pressure using Inclined Manometer
Go Pressure a = Specific Weight 1*Length of Inclined Manometer*sin(Angle)
Absolute Pressure at Height h
Go Absolute pressure = Atmospheric pressure+Specific weight of liquids*Height Absolute
Height of Liquid given its Absolute Pressure
Go Height Absolute = (Absolute pressure-Atmospheric pressure)/Specific Weight
Pressure Wave Velocity in Fluids
Go Velocity of pressure wave = sqrt(Bulk Modulus/Mass Density)
Velocity of Fluid given Dynamic Pressure
Go Fluid Velocity = sqrt(Dynamic Pressure*2/Liquid Density)
Dynamic Pressure Head-Pitot Tube
Go Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity)
Diameter of Soap Bubble
Go Diameter of Droplet = (8*Surface Tensions)/Pressure Changes
Surface Tension of Liquid Drop given Change in Pressure
Go Surface Tensions = Pressure Changes*Diameter of Droplet/4
Diameter of Droplet given Change in Pressure
Go Diameter of Droplet = 4*Surface Tensions/Pressure Changes
Mass Density given Velocity of Pressure Wave
Go Mass Density = Bulk Modulus/(Velocity of pressure wave^2)
Surface Tension of Soap Bubble
Go Surface Tensions = Pressure Changes*Diameter of Droplet/8
Dynamic Pressure of Fluid
Go Dynamic Pressure = (Liquid Density*Fluid Velocity^(2))/2
Bulk Modulus given Velocity of Pressure Wave
Go Bulk Modulus = Velocity of pressure wave^2*Mass Density
Density of Liquid given Dynamic Pressure
Go Liquid Density = 2*Dynamic Pressure/(Fluid Velocity^2)

Surface Tension of Soap Bubble Formula

Surface Tensions = Pressure Changes*Diameter of Droplet/8
σchange = Δp*d/8

Define Surface Tension ?

Surface tension is the tendency of liquid surfaces to shrink into the minimum surface area possible. Surface tension allows insects (e.g. water striders), to float and slide on a water surface without becoming even partly submerged.

How to Calculate Surface Tension of Soap Bubble?

Surface Tension of Soap Bubble calculator uses Surface Tensions = Pressure Changes*Diameter of Droplet/8 to calculate the Surface Tensions, The Surface Tension of Soap Bubble formula is defined as the tendency of liquid surfaces to shrink into the minimum surface area possible. Surface Tensions is denoted by σchange symbol.

How to calculate Surface Tension of Soap Bubble using this online calculator? To use this online calculator for Surface Tension of Soap Bubble, enter Pressure Changes (Δp) & Diameter of Droplet (d) and hit the calculate button. Here is how the Surface Tension of Soap Bubble calculation can be explained with given input values -> 0.5082 = 3.36*1.21/8.

FAQ

What is Surface Tension of Soap Bubble?
The Surface Tension of Soap Bubble formula is defined as the tendency of liquid surfaces to shrink into the minimum surface area possible and is represented as σchange = Δp*d/8 or Surface Tensions = Pressure Changes*Diameter of Droplet/8. Pressure changes is the difference between the pressure inside the liquid droplet and atmospheric pressure & Diameter of droplet is the length of the longest chord of the liquid droplet.
How to calculate Surface Tension of Soap Bubble?
The Surface Tension of Soap Bubble formula is defined as the tendency of liquid surfaces to shrink into the minimum surface area possible is calculated using Surface Tensions = Pressure Changes*Diameter of Droplet/8. To calculate Surface Tension of Soap Bubble, you need Pressure Changes (Δp) & Diameter of Droplet (d). With our tool, you need to enter the respective value for Pressure Changes & Diameter of Droplet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Surface Tensions?
In this formula, Surface Tensions uses Pressure Changes & Diameter of Droplet. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Surface Tensions = Pressure Changes*Diameter of Droplet/4
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!