Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid Solution

STEP 0: Pre-Calculation Summary
Formula Used
Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature
T = qG/(8*k)*(b^2-4*x^2)+(qG*b)/(2*hc)+Tโˆž
This formula uses 7 Variables
Variables Used
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
Internal Heat Generation - (Measured in Watt Per Cubic Meter) - Internal Heat Generation is defined as the conversion of electrical, chemical, or nuclear energy into heat (or thermal) energy which leads to a rise in temperature throughout the medium.
Thermal Conductivity - (Measured in Watt per Meter per K) - Thermal Conductivity is rate of heat passes through specified material, expressed as amount of heat flows per unit time through a unit area with a temperature gradient of one degree per unit distance.
Wall Thickness - (Measured in Meter) - Wall Thickness is simply the width of the wall that we are taking under consideration.
Thickness - (Measured in Meter) - Thickness is the distance from one end to the desired end of the body or object.
Convection Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - Convection Heat Transfer Coefficient is the rate of heat transfer between a solid surface and a fluid per unit surface area per unit temperature.
Fluid Temperature - (Measured in Kelvin) - Fluid Temperature is the temperature of the fluid surrounding the object.
STEP 1: Convert Input(s) to Base Unit
Internal Heat Generation: 100 Watt Per Cubic Meter --> 100 Watt Per Cubic Meter No Conversion Required
Thermal Conductivity: 10.18 Watt per Meter per K --> 10.18 Watt per Meter per K No Conversion Required
Wall Thickness: 12.601905 Meter --> 12.601905 Meter No Conversion Required
Thickness: 4.266748 Meter --> 4.266748 Meter No Conversion Required
Convection Heat Transfer Coefficient: 1.834786 Watt per Square Meter per Kelvin --> 1.834786 Watt per Square Meter per Kelvin No Conversion Required
Fluid Temperature: 11 Kelvin --> 11 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
T = qG/(8*k)*(b^2-4*x^2)+(qG*b)/(2*hc)+Tโˆž --> 100/(8*10.18)*(12.601905^2-4*4.266748^2)+(100*12.601905)/(2*1.834786)+11
Evaluating ... ...
T = 460.00001862818
STEP 3: Convert Result to Output's Unit
460.00001862818 Kelvin --> No Conversion Required
FINAL ANSWER
460.00001862818 โ‰ˆ 460 Kelvin <-- Temperature
(Calculation completed in 00.004 seconds)

Credits

Created by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has created this Calculator and 200+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

14 Steady State Heat Conduction with Heat Generation Calculators

Temperature Inside Hollow Cylinder at given Radius between Inner and Outer Radius
Go Temperature = Internal Heat Generation/(4*Thermal Conductivity)*(Outer Radius of Cylinder^2-Radius^2)+Outer Surface Temperature+ln(Radius/Outer Radius of Cylinder)/ln(Outer Radius of Cylinder/Inner Radius of Cylinder)*(Internal Heat Generation/(4*Thermal Conductivity)*(Outer Radius of Cylinder^2-Inner Radius of Cylinder^2)+(Outer Surface Temperature-Inner Surface Temperature))
Temperature Inside Hollow Sphere at given Radius between Inner and Outer Radius
Go Temperature = Surface Temperature of wall+Internal Heat Generation/(6*Thermal Conductivity)*(Outer Radius of Sphere^2-Radius^2)+(Internal Heat Generation*Inner Radius of Sphere^3)/(3*Thermal Conductivity)*(1/Outer Radius of Sphere-1/Radius)
Temperature Inside Solid Cylinder at given Radius Immersed in Fluid
Go Temperature Solid Cylinder = Internal Heat Generation/(4*Thermal Conductivity)*(Radius of Cylinder^2-Radius^2)+Fluid Temperature+(Internal Heat Generation*Radius of Cylinder)/(2*Convection Heat Transfer Coefficient)
Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid
Go Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature
Maximum Temperature Inside Solid Cylinder Immersed in Fluid
Go Maximum Temperature = Fluid Temperature+(Internal Heat Generation*Radius of Cylinder)/(4*Convection Heat Transfer Coefficient*(2+(Convection Heat Transfer Coefficient*Radius of Cylinder)/Thermal Conductivity))
Maximum Temperature in Plane Wall Surrounded by Fluid with Symmetrical Boundary Conditions
Go Maximum Temperature of Plain Wall = (Internal Heat Generation*Wall Thickness^2)/(8*Thermal Conductivity)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature
Temperature Inside Plane Wall at given Thickness x with Symmetrical Boundary Conditions
Go Temperature 1 = -(Internal Heat Generation*Wall Thickness^2)/(2*Thermal Conductivity)*(Thickness/Wall Thickness-(Thickness/Wall Thickness)^2)+Surface Temperature
Temperature Inside Solid Cylinder at given Radius
Go Temperature Solid Cylinder = Internal Heat Generation/(4*Thermal Conductivity)*(Radius of Cylinder^2-Radius^2)+Surface Temperature of wall
Temperature Inside Solid Sphere at given Radius
Go Temperature 2 = Surface Temperature of wall+Internal Heat Generation/(6*Thermal Conductivity)*(Radius of Sphere^2-Radius^2)
Surface Temperature of Solid Cylinder Immersed in Fluid
Go Surface Temperature of wall = Fluid Temperature+(Internal Heat Generation*Radius of Cylinder)/(2*Convection Heat Transfer Coefficient)
Maximum Temperature in Solid Cylinder
Go Maximum Temperature = Surface Temperature of wall+(Internal Heat Generation*Radius of Cylinder^2)/(4*Thermal Conductivity)
Maximum Temperature in Solid Sphere
Go Maximum Temperature = Surface Temperature of wall+(Internal Heat Generation*Radius of Sphere^2)/(6*Thermal Conductivity)
Maximum Temperature in Plane Wall with Symmetrical Boundary Conditions
Go Maximum Temperature = Surface Temperature+(Internal Heat Generation*Wall Thickness^2)/(8*Thermal Conductivity)
Location of Maximum Temperature in Plane Wall with Symmetrical Boundary Conditions
Go Location of Maximum Temperature = Wall Thickness/2

Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid Formula

Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature
T = qG/(8*k)*(b^2-4*x^2)+(qG*b)/(2*hc)+Tโˆž

What is steady state conduction?

Steady-state conduction is the form of conduction that happens when the temperature difference(s) driving the conduction are constant.

What is internal heat generation?

Internal heat generation is defined as the conversion of electrical, chemical, or nuclear energy into heat (or thermal) energy which leads to a rise in temperature throughout the medium.

How to Calculate Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid?

Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid calculator uses Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature to calculate the Temperature, The Temperature at given thickness x inside plane wall surrounded by fluid formula gives the value of temperature at the desired thickness of the plane wall which is provided with an internal heat generation source and surrounded by a fluid with the symmetrical temperature conditions around the wall. Temperature is denoted by T symbol.

How to calculate Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid using this online calculator? To use this online calculator for Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid, enter Internal Heat Generation (qG), Thermal Conductivity (k), Wall Thickness (b), Thickness (x), Convection Heat Transfer Coefficient (hc) & Fluid Temperature (Tโˆž) and hit the calculate button. Here is how the Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid calculation can be explained with given input values -> 460.0001 = 100/(8*10.18)*(12.601905^2-4*4.266748^2)+(100*12.601905)/(2*1.834786)+11.

FAQ

What is Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid?
The Temperature at given thickness x inside plane wall surrounded by fluid formula gives the value of temperature at the desired thickness of the plane wall which is provided with an internal heat generation source and surrounded by a fluid with the symmetrical temperature conditions around the wall and is represented as T = qG/(8*k)*(b^2-4*x^2)+(qG*b)/(2*hc)+Tโˆž or Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature. Internal Heat Generation is defined as the conversion of electrical, chemical, or nuclear energy into heat (or thermal) energy which leads to a rise in temperature throughout the medium, Thermal Conductivity is rate of heat passes through specified material, expressed as amount of heat flows per unit time through a unit area with a temperature gradient of one degree per unit distance, Wall Thickness is simply the width of the wall that we are taking under consideration, Thickness is the distance from one end to the desired end of the body or object, Convection Heat Transfer Coefficient is the rate of heat transfer between a solid surface and a fluid per unit surface area per unit temperature & Fluid Temperature is the temperature of the fluid surrounding the object.
How to calculate Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid?
The Temperature at given thickness x inside plane wall surrounded by fluid formula gives the value of temperature at the desired thickness of the plane wall which is provided with an internal heat generation source and surrounded by a fluid with the symmetrical temperature conditions around the wall is calculated using Temperature = Internal Heat Generation/(8*Thermal Conductivity)*(Wall Thickness^2-4*Thickness^2)+(Internal Heat Generation*Wall Thickness)/(2*Convection Heat Transfer Coefficient)+Fluid Temperature. To calculate Temperature at given Thickness x Inside Plane Wall Surrounded by Fluid, you need Internal Heat Generation (qG), Thermal Conductivity (k), Wall Thickness (b), Thickness (x), Convection Heat Transfer Coefficient (hc) & Fluid Temperature (Tโˆž). With our tool, you need to enter the respective value for Internal Heat Generation, Thermal Conductivity, Wall Thickness, Thickness, Convection Heat Transfer Coefficient & Fluid Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Temperature?
In this formula, Temperature uses Internal Heat Generation, Thermal Conductivity, Wall Thickness, Thickness, Convection Heat Transfer Coefficient & Fluid Temperature. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Temperature = Internal Heat Generation/(4*Thermal Conductivity)*(Outer Radius of Cylinder^2-Radius^2)+Outer Surface Temperature+ln(Radius/Outer Radius of Cylinder)/ln(Outer Radius of Cylinder/Inner Radius of Cylinder)*(Internal Heat Generation/(4*Thermal Conductivity)*(Outer Radius of Cylinder^2-Inner Radius of Cylinder^2)+(Outer Surface Temperature-Inner Surface Temperature))
  • Temperature = Surface Temperature of wall+Internal Heat Generation/(6*Thermal Conductivity)*(Outer Radius of Sphere^2-Radius^2)+(Internal Heat Generation*Inner Radius of Sphere^3)/(3*Thermal Conductivity)*(1/Outer Radius of Sphere-1/Radius)
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!