Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
σteye = L/(b*(do-d))
This formula uses 5 Variables
Variables Used
Tensile Stress in Eye of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
STEP 1: Convert Input(s) to Base Unit
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σteye = L/(b*(do-d)) --> 50000/(0.04*(0.08-0.037))
Evaluating ... ...
σteye = 29069767.4418605
STEP 3: Convert Result to Output's Unit
29069767.4418605 Pascal -->29.0697674418605 Newton per Square Millimeter (Check conversion here)
FINAL ANSWER
29.0697674418605 29.06977 Newton per Square Millimeter <-- Tensile Stress in Eye of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter
Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)
Thickness of Eye End of Knuckle Joint given Bending Stress in Pin
Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Shear Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork
Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)
Thickness of Eye End of Knuckle Joint given Bending Moment in Pin
Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)
Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)
Tensile Stress in Rod of Knuckle Joint
Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)
Bending Stress in Knuckle Pin given Bending Moment in Pin
Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)
Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter
Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)
Thickness of Eye of Knuckle Joint given Rod Diameter
Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness Formula

Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
σteye = L/(b*(do-d))

Parts of the knuckle joint

A knuckle joint always has a fork end, an eye end, and a pin. Typically, these are all specially made parts although standard rod ends are sometimes used for the eye end. This has the advantage that a rod end allows some additional rotational movement perpendicular to the pin axis, providing further protection against bending stress.
Various types of pins can also be used. The most common is a special pin with a shoulder at one end and a cross hole at the other to accept a collar and split pint. For large structures, such as bridges, cold rivets were historically used. The pivot may also be bolted.

How to Calculate Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?

Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness calculator uses Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Tensile Stress in Eye of Knuckle Joint, The Tensile stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension. Tensile Stress in Eye of Knuckle Joint is denoted by σteye symbol.

How to calculate Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness using this online calculator? To use this online calculator for Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness, enter Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness calculation can be explained with given input values -> 2.9E-5 = 50000/(0.04*(0.08-0.037)).

FAQ

What is Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?
The Tensile stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension and is represented as σteye = L/(b*(do-d)) or Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
How to calculate Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?
The Tensile stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension is calculated using Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness, you need Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!