Thickness of Eye End of Knuckle Joint given Bending Stress in Pin Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*((pi*d^3*σb)/(16*L)-a/3)
This formula uses 1 Constants, 5 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
Bending Stress in Knuckle Pin - (Measured in Pascal) - Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
STEP 1: Convert Input(s) to Base Unit
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
Bending Stress in Knuckle Pin: 82 Newton per Square Millimeter --> 82000000 Pascal (Check conversion here)
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Fork Eye of Knuckle Joint: 26 Millimeter --> 0.026 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
b = 4*((pi*d^3*σb)/(16*L)-a/3) --> 4*((pi*0.037^3*82000000)/(16*50000)-0.026/3)
Evaluating ... ...
b = 0.0305770813330697
STEP 3: Convert Result to Output's Unit
0.0305770813330697 Meter -->30.5770813330697 Millimeter (Check conversion here)
FINAL ANSWER
30.5770813330697 30.57708 Millimeter <-- Thickess of Eye of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter
Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)
Thickness of Eye End of Knuckle Joint given Bending Stress in Pin
Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Shear Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork
Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)
Thickness of Eye End of Knuckle Joint given Bending Moment in Pin
Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)
Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)
Tensile Stress in Rod of Knuckle Joint
Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)
Bending Stress in Knuckle Pin given Bending Moment in Pin
Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)
Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter
Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)
Thickness of Eye of Knuckle Joint given Rod Diameter
Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin Formula

Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*((pi*d^3*σb)/(16*L)-a/3)

Advantages of Knuckle Joint

1.Knuckle joint can withstand large tensile loads.
2.It has good mechanical rigidity.
3.Also, it is simple to manufacture and set up.
4.It can be easily assembled and dismantled.
5.Design is simple and easy.
6.Fewer parts are less costly and more reliable.
7.It can permit angular movement between rods.
8.High repeating accuracy even with varying material thickness and tensile strengths.
9.Reduced impact shock and high system rigidity.
10.Long tool life.

How to Calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin calculator uses Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3) to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin using this online calculator? To use this online calculator for Thickness of Eye End of Knuckle Joint given Bending Stress in Pin, enter Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin b), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a) and hit the calculate button. Here is how the Thickness of Eye End of Knuckle Joint given Bending Stress in Pin calculation can be explained with given input values -> 30577.08 = 4*((pi*0.037^3*82000000)/(16*50000)-0.026/3).

FAQ

What is Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?
The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis and is represented as b = 4*((pi*d^3*σb)/(16*L)-a/3) or Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3). Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint, Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts & Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
How to calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?
The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3). To calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin, you need Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin b), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a). With our tool, you need to enter the respective value for Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Eye of Knuckle Joint?
In this formula, Thickess of Eye of Knuckle Joint uses Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
  • Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!