Track Width of Vehicle given Wheel rate and Roll rate Solution

STEP 0: Pre-Calculation Summary
Formula Used
Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle)
a = sqrt((2*KΦ)/Kt)
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Track Width of Vehicle - (Measured in Meter) - Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).
Roll rate/ Roll stiffness - (Measured in Newton Meter per Radian) - Roll rate/ Roll stiffness is the resistance moment generated per unit of roll angle of the sprung mass, and it has SI units of Nm/rad.
Wheel rate of vehicle - (Measured in Newton per Meter) - Wheel rate of vehicle is effectively the spring rate when measured at the wheel as opposed to at the spring.
STEP 1: Convert Input(s) to Base Unit
Roll rate/ Roll stiffness: 40000 Newton Meter per Radian --> 40000 Newton Meter per Radian No Conversion Required
Wheel rate of vehicle: 100 Newton per Meter --> 100 Newton per Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = sqrt((2*KΦ)/Kt) --> sqrt((2*40000)/100)
Evaluating ... ...
a = 28.2842712474619
STEP 3: Convert Result to Output's Unit
28.2842712474619 Meter --> No Conversion Required
FINAL ANSWER
28.2842712474619 28.28427 Meter <-- Track Width of Vehicle
(Calculation completed in 00.004 seconds)

Credits

Created by Vivek Gaikwad
AISSMS College of Engineering, Pune (AISSMSCOE, Pune), Pune
Vivek Gaikwad has created this Calculator and 25+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

12 Race Car Vehicle Dynamics Calculators

Height of Center of Gravity of Vehicle by method of jacking Vehicle from Rear
Go Height of Center of gravity (C.G.) of vehicle = (Loaded radius of front wheels*(Horizontal distance of C.G. From rear axle/Wheelbase of Vehicle))+(Loaded radius of rear wheels*(Horizontal distance of C.G. From rear axle/Wheelbase of Vehicle))+(((Weight of front wheels with rear elevated*Wheelbase of Vehicle)-(Mass of vehicle*Horizontal distance of C.G. From rear axle))/(Mass of vehicle*tan(Angle through which rear axle of vehicle raised)))
Spring rate required for coilover given desired droop and motion ratio
Go Stiffness of Spring = Corner sprung mass of vehicle*Acceleration due to Gravity/(Motion ratio in suspension*Wheel travel*cos(Angle of spring/shock absorber from vertical))
Spring rate provided Wheel rate
Go Stiffness of Spring = Wheel rate of vehicle/(((Motion ratio in suspension)^2)*(cos(Angle of spring/shock absorber from vertical)))
Installation Ratio given Wheel Rate
Go Installation ratio = sqrt(Wheel rate of vehicle/(Spring rate*cos(Damper angle from vertical)))
Damper angle from Vertical given wheel rate
Go Damper angle from vertical = acos(Wheel rate of vehicle/(Spring rate*(Installation ratio^2)))
Spring rate given wheel rate
Go Spring rate = Wheel rate of vehicle/((Installation ratio^2)*cos(Damper angle from vertical))
Wheel rate
Go Wheel rate of vehicle = Spring rate*(Installation ratio^2)*cos(Damper angle from vertical)
Wheel rate in vehicle
Go Wheel rate of vehicle = Stiffness of Spring*((Motion ratio in suspension)^2)*(Spring angle correction factor)
Track Width of Vehicle given Wheel rate and Roll rate
Go Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle)
Spring angle correction factor
Go Spring angle correction factor = cos(Angle of spring/shock absorber from vertical)
Roll rate or Roll stiffness
Go Roll rate/ Roll stiffness = ((Track Width of Vehicle^2)*Wheel rate of vehicle)/2
Wheel rate given Roll rate
Go Wheel rate of vehicle = (2*Roll rate/ Roll stiffness)/Track Width of Vehicle^2

Track Width of Vehicle given Wheel rate and Roll rate Formula

Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle)
a = sqrt((2*KΦ)/Kt)

Track width of vehicle

The track width of the vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).

How to Calculate Track Width of Vehicle given Wheel rate and Roll rate?

Track Width of Vehicle given Wheel rate and Roll rate calculator uses Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle) to calculate the Track Width of Vehicle, The Track Width of Vehicle given Wheel rate and Roll rate formula is the distance between the center line of each of the two wheels on the same axle (front/rear axle). Track Width of Vehicle is denoted by a symbol.

How to calculate Track Width of Vehicle given Wheel rate and Roll rate using this online calculator? To use this online calculator for Track Width of Vehicle given Wheel rate and Roll rate, enter Roll rate/ Roll stiffness (KΦ) & Wheel rate of vehicle (Kt) and hit the calculate button. Here is how the Track Width of Vehicle given Wheel rate and Roll rate calculation can be explained with given input values -> 28.28427 = sqrt((2*40000)/100).

FAQ

What is Track Width of Vehicle given Wheel rate and Roll rate?
The Track Width of Vehicle given Wheel rate and Roll rate formula is the distance between the center line of each of the two wheels on the same axle (front/rear axle) and is represented as a = sqrt((2*KΦ)/Kt) or Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle). Roll rate/ Roll stiffness is the resistance moment generated per unit of roll angle of the sprung mass, and it has SI units of Nm/rad & Wheel rate of vehicle is effectively the spring rate when measured at the wheel as opposed to at the spring.
How to calculate Track Width of Vehicle given Wheel rate and Roll rate?
The Track Width of Vehicle given Wheel rate and Roll rate formula is the distance between the center line of each of the two wheels on the same axle (front/rear axle) is calculated using Track Width of Vehicle = sqrt((2*Roll rate/ Roll stiffness)/Wheel rate of vehicle). To calculate Track Width of Vehicle given Wheel rate and Roll rate, you need Roll rate/ Roll stiffness (KΦ) & Wheel rate of vehicle (Kt). With our tool, you need to enter the respective value for Roll rate/ Roll stiffness & Wheel rate of vehicle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!