Transition Frequency Solution

STEP 0: Pre-Calculation Summary
Formula Used
Transition Frequency = 1/sqrt(Constant B)
f1,2 = 1/sqrt(B)
This formula uses 1 Functions, 2 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Transition Frequency - (Measured in Hertz) - The Transition Frequency associated with the transition (1 to 2 or 2 to 1) between two different vibrational levels.
Constant B - Constant B is one of the constant in Andrade's equation.
STEP 1: Convert Input(s) to Base Unit
Constant B: 4 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
f1,2 = 1/sqrt(B) --> 1/sqrt(4)
Evaluating ... ...
f1,2 = 0.5
STEP 3: Convert Result to Output's Unit
0.5 Hertz --> No Conversion Required
FINAL ANSWER
0.5 Hertz <-- Transition Frequency
(Calculation completed in 00.004 seconds)

Credits

Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

4 Response Analysis Calculators

Power Drain from Positive Sine Wave
Go Power Drained = (Peak Voltage*Supply Voltage)/(pi*Load Resistance)
Peak Voltage of Positive Sine Wave
Go Peak Voltage = (pi*Power Drained*Load Resistance)/Supply Voltage
Unity-Gain Bandwidth
Go Unity Gain Bandwidth = Common Emitter Current Gain*3-dB Frequency
Transition Frequency
Go Transition Frequency = 1/sqrt(Constant B)

Transition Frequency Formula

Transition Frequency = 1/sqrt(Constant B)
f1,2 = 1/sqrt(B)

What is the purpose of source follower?

An important aspect of the source follower is to provide power or current gain. That is to say drive a lower resistance (impedance) load from a higher resistance (impedance) stage. Thus it is instructive to measure the source follower output impedance.

How to Calculate Transition Frequency?

Transition Frequency calculator uses Transition Frequency = 1/sqrt(Constant B) to calculate the Transition Frequency, The transition frequency of an amplifier is the point in a frequency range where an amplifier no longer provides any gain. At this frequency, the gain of the amplifier is equal to 1, which means it produces no gain of the input signal. Transition Frequency is denoted by f1,2 symbol.

How to calculate Transition Frequency using this online calculator? To use this online calculator for Transition Frequency, enter Constant B (B) and hit the calculate button. Here is how the Transition Frequency calculation can be explained with given input values -> 0.5 = 1/sqrt(4).

FAQ

What is Transition Frequency?
The transition frequency of an amplifier is the point in a frequency range where an amplifier no longer provides any gain. At this frequency, the gain of the amplifier is equal to 1, which means it produces no gain of the input signal and is represented as f1,2 = 1/sqrt(B) or Transition Frequency = 1/sqrt(Constant B). Constant B is one of the constant in Andrade's equation.
How to calculate Transition Frequency?
The transition frequency of an amplifier is the point in a frequency range where an amplifier no longer provides any gain. At this frequency, the gain of the amplifier is equal to 1, which means it produces no gain of the input signal is calculated using Transition Frequency = 1/sqrt(Constant B). To calculate Transition Frequency, you need Constant B (B). With our tool, you need to enter the respective value for Constant B and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!