Transmitted Voltage (Load SC) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Transmitted Voltage = Transmitted Current*Characteristic Impedance
Vt = It*Z0
This formula uses 3 Variables
Variables Used
Transmitted Voltage - (Measured in Volt) - Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
Transmitted Current - (Measured in Ampere) - Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.
STEP 1: Convert Input(s) to Base Unit
Transmitted Current: 4.8 Ampere --> 4.8 Ampere No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vt = It*Z0 --> 4.8*55.5
Evaluating ... ...
Vt = 266.4
STEP 3: Convert Result to Output's Unit
266.4 Volt --> No Conversion Required
FINAL ANSWER
266.4 Volt <-- Transmitted Voltage
(Calculation completed in 00.019 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

4 Load Is Short Circuited Calculators

Transmitted Voltage (Load SC)
Go Transmitted Voltage = Transmitted Current*Characteristic Impedance
Incident Voltage using Reflected Voltage (Load SC)
Go Incident Voltage = (-1)*Reflected Voltage
Incident Current using Transmitted Current (Load SC)
Go Incident Current = Transmitted Current/2
Transmitted Current (Load SC)
Go Transmitted Current = 2*Incident Current

Transmitted Voltage (Load SC) Formula

Transmitted Voltage = Transmitted Current*Characteristic Impedance
Vt = It*Z0

Explain Short-Circuited Load for Travelling Waves.

The unique characteristic of the short circuit is that the voltage across it is zero. When an incident voltage wave E arrives at a short circuit, the reflected voltage wave must be – E to satisfy the condition that the voltage across the short circuit is zero.

How to Calculate Transmitted Voltage (Load SC)?

Transmitted Voltage (Load SC) calculator uses Transmitted Voltage = Transmitted Current*Characteristic Impedance to calculate the Transmitted Voltage, The Transmitted Voltage (Load SC) formula is defined as the magnitude of voltage wave traveling through the Load of the transmission line. Transmitted Voltage is denoted by Vt symbol.

How to calculate Transmitted Voltage (Load SC) using this online calculator? To use this online calculator for Transmitted Voltage (Load SC), enter Transmitted Current (It) & Characteristic Impedance (Z0) and hit the calculate button. Here is how the Transmitted Voltage (Load SC) calculation can be explained with given input values -> 266.4 = 4.8*55.5.

FAQ

What is Transmitted Voltage (Load SC)?
The Transmitted Voltage (Load SC) formula is defined as the magnitude of voltage wave traveling through the Load of the transmission line and is represented as Vt = It*Z0 or Transmitted Voltage = Transmitted Current*Characteristic Impedance. Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.
How to calculate Transmitted Voltage (Load SC)?
The Transmitted Voltage (Load SC) formula is defined as the magnitude of voltage wave traveling through the Load of the transmission line is calculated using Transmitted Voltage = Transmitted Current*Characteristic Impedance. To calculate Transmitted Voltage (Load SC), you need Transmitted Current (It) & Characteristic Impedance (Z0). With our tool, you need to enter the respective value for Transmitted Current & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!