Ultimate Strength when Wind and Earthquake Loads are not Applied Solution

STEP 0: Pre-Calculation Summary
Formula Used
Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
U = (1.4*DL)+(1.7*LL)
This formula uses 3 Variables
Variables Used
Ultimate Strength - (Measured in Pascal) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Dead Load - (Measured in Pascal) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).
Live Load - (Measured in Pascal) - Live Load are variable as they depend on usage and capacity.
STEP 1: Convert Input(s) to Base Unit
Dead Load: 10.01 Kilonewton per Square Meter --> 10010 Pascal (Check conversion here)
Live Load: 5 Kilonewton per Square Meter --> 5000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
U = (1.4*DL)+(1.7*LL) --> (1.4*10010)+(1.7*5000)
Evaluating ... ...
U = 22514
STEP 3: Convert Result to Output's Unit
22514 Pascal -->22.514 Kilonewton per Square Meter (Check conversion here)
FINAL ANSWER
22.514 Kilonewton per Square Meter <-- Ultimate Strength
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has verified this Calculator and 100+ more calculators!

6 Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads
Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)
Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads
Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)
Basic Load Effect given Ultimate Strength for Applied Wind Loads
Go Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
Wind Load Effect given Ultimate Strength for Applied Wind Loads
Go Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3)
Ultimate Strength when Wind and Earthquake Loads are not Applied
Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
Ultimate Strength when Wind Loads are Applied
Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Ultimate Strength when Wind and Earthquake Loads are not Applied Formula

Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
U = (1.4*DL)+(1.7*LL)

What is Ultimate Strength?

The capacities to resist design loads and their related internal moments and forces is known as ultimate strength.

How to Calculate Ultimate Strength when Wind and Earthquake Loads are not Applied?

Ultimate Strength when Wind and Earthquake Loads are not Applied calculator uses Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load) to calculate the Ultimate Strength, The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure. Ultimate Strength is denoted by U symbol.

How to calculate Ultimate Strength when Wind and Earthquake Loads are not Applied using this online calculator? To use this online calculator for Ultimate Strength when Wind and Earthquake Loads are not Applied, enter Dead Load (DL) & Live Load (LL) and hit the calculate button. Here is how the Ultimate Strength when Wind and Earthquake Loads are not Applied calculation can be explained with given input values -> 0.0225 = (1.4*10010)+(1.7*5000).

FAQ

What is Ultimate Strength when Wind and Earthquake Loads are not Applied?
The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure and is represented as U = (1.4*DL)+(1.7*LL) or Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load). Dead Load consisting of basic load plus volume change due to (shrinkage,temperature) & Live Load are variable as they depend on usage and capacity.
How to calculate Ultimate Strength when Wind and Earthquake Loads are not Applied?
The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure is calculated using Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load). To calculate Ultimate Strength when Wind and Earthquake Loads are not Applied, you need Dead Load (DL) & Live Load (LL). With our tool, you need to enter the respective value for Dead Load & Live Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Ultimate Strength?
In this formula, Ultimate Strength uses Dead Load & Live Load. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!