Velocity Factor for Generated Teeth of Bevel Gear Solution

STEP 0: Pre-Calculation Summary
Formula Used
Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear))
Cv gen = 5.6/(5.6+sqrt(v))
This formula uses 1 Functions, 2 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Velocity Factor for Generated Teeth - Velocity Factor for Generated Teeth is defined as the ratio of the static load at the failure to the dynamic load onto it at failure.
Pitch Line Velocity of Bevel Gear - (Measured in Meter per Second) - Pitch Line Velocity of Bevel Gear is defined as the velocity of a point on the pitch circle of gear.
STEP 1: Convert Input(s) to Base Unit
Pitch Line Velocity of Bevel Gear: 2 Meter per Second --> 2 Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Cv gen = 5.6/(5.6+sqrt(v)) --> 5.6/(5.6+sqrt(2))
Evaluating ... ...
Cv gen = 0.79837888456099
STEP 3: Convert Result to Output's Unit
0.79837888456099 --> No Conversion Required
FINAL ANSWER
0.79837888456099 0.798379 <-- Velocity Factor for Generated Teeth
(Calculation completed in 00.004 seconds)

Credits

Created by Akshay Talbar
Vishwakarma University (VU), Pune
Akshay Talbar has created this Calculator and 25+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

5 Performance Factors Calculators

Ratio Factor for Bevel Gear
Go Ratio Factor for Bevel Gear = (2*Number of Teeth on Bevel Gear)/(Number of Teeth on Bevel Gear+Number of Teeth on Pinion*tan(Pitch Angle for Bevel Gear))
Velocity Factor for Generated Teeth of Bevel Gear
Go Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear))
Power Transmitted
Go Shaft Power = 2*pi*Speed of Rotation*Torque applied
Bevel Factor
Go Bevel Factor = 1-Face Width of Bevel Gear Tooth/Cone Distance
Velocity Factor for Cut Teeth of Bevel Gear
Go Velocity Factor for Cut Teeth = 6/(6+Pitch Line Velocity of Bevel Gear)

Velocity Factor for Generated Teeth of Bevel Gear Formula

Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear))
Cv gen = 5.6/(5.6+sqrt(v))

Why velocity factor is used ?

The velocity factor is used for the calculation of the effective load on the gear tooth. This contains various terms such as tangential load, service factor.

How to Calculate Velocity Factor for Generated Teeth of Bevel Gear?

Velocity Factor for Generated Teeth of Bevel Gear calculator uses Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear)) to calculate the Velocity Factor for Generated Teeth, Velocity factor for generated teeth of Bevel Gear is defined as the ratio of the static load at the failure on the gear teeth to the dynamic load onto it at failure. Velocity Factor for Generated Teeth is denoted by Cv gen symbol.

How to calculate Velocity Factor for Generated Teeth of Bevel Gear using this online calculator? To use this online calculator for Velocity Factor for Generated Teeth of Bevel Gear, enter Pitch Line Velocity of Bevel Gear (v) and hit the calculate button. Here is how the Velocity Factor for Generated Teeth of Bevel Gear calculation can be explained with given input values -> 0.798379 = 5.6/(5.6+sqrt(2)).

FAQ

What is Velocity Factor for Generated Teeth of Bevel Gear?
Velocity factor for generated teeth of Bevel Gear is defined as the ratio of the static load at the failure on the gear teeth to the dynamic load onto it at failure and is represented as Cv gen = 5.6/(5.6+sqrt(v)) or Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear)). Pitch Line Velocity of Bevel Gear is defined as the velocity of a point on the pitch circle of gear.
How to calculate Velocity Factor for Generated Teeth of Bevel Gear?
Velocity factor for generated teeth of Bevel Gear is defined as the ratio of the static load at the failure on the gear teeth to the dynamic load onto it at failure is calculated using Velocity Factor for Generated Teeth = 5.6/(5.6+sqrt(Pitch Line Velocity of Bevel Gear)). To calculate Velocity Factor for Generated Teeth of Bevel Gear, you need Pitch Line Velocity of Bevel Gear (v). With our tool, you need to enter the respective value for Pitch Line Velocity of Bevel Gear and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!