Vertical Tyre Axle Rate given Roll Rate Solution

STEP 0: Pre-Calculation Summary
Formula Used
Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2)
KW = (KΦ*Kt*(tR^2)/2)/(Kt*(tR^2)/2-KΦ*(Ts^2)/2)
This formula uses 5 Variables
Variables Used
Wheel Centre Rate - (Measured in Newton per Meter) - Wheel Centre Rate is the vertical force acting on the tire per unit vertical displacement at the location along the spindle corresponding to the wheel centerline, measured relative to the chassis.
Roll Rate - (Measured in Newton Meter per Radian) - Roll Rate or Roll stiffness is the resistance moment generated per unit of roll angle of the sprung mass.
Tyre Vertical Rate - (Measured in Newton per Meter) - Tyre Vertical Rate is the spring rate controlled by the tyre compound, sidewall stiffness and operating pressure.
Rear Track Width - (Measured in Meter) - Rear Track Width is the distance between the centers of the rear wheels.
Spring Track Width - (Measured in Meter) - Spring Track Width is the distance between the springs on either side of the axle.
STEP 1: Convert Input(s) to Base Unit
Roll Rate: 11805 Newton Meter per Radian --> 11805 Newton Meter per Radian No Conversion Required
Tyre Vertical Rate: 321300 Newton per Meter --> 321300 Newton per Meter No Conversion Required
Rear Track Width: 1.5 Meter --> 1.5 Meter No Conversion Required
Spring Track Width: 0.9 Meter --> 0.9 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
KW = (KΦ*Kt*(tR^2)/2)/(Kt*(tR^2)/2-KΦ*(Ts^2)/2) --> (11805*321300*(1.5^2)/2)/(321300*(1.5^2)/2-11805*(0.9^2)/2)
Evaluating ... ...
KW = 11963.2364212355
STEP 3: Convert Result to Output's Unit
11963.2364212355 Newton per Meter --> No Conversion Required
FINAL ANSWER
11963.2364212355 11963.24 Newton per Meter <-- Wheel Centre Rate
(Calculation completed in 00.020 seconds)

Credits

National Institute of Technology Calicut (NIT Calicut), Calicut, Kerala
Peri Krishna Karthik has created this Calculator and 200+ more calculators!
Verified by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has verified this Calculator and 100+ more calculators!

10+ Rates for Axle Suspension in Race Car Calculators

Roll Rate with Anti-Roll Bar
Go Roll Rate = (Tyre Vertical Rate*(Rear Track Width^2)/2*(Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width^2)/2))/(Tyre Vertical Rate*(Rear Track Width^2)/2+Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width^2)/2)
Rear Track Width given Roll Rate of Suspension with Anti-Roll Bar
Go Rear Track Width = sqrt(2*(Roll Rate*(Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width)^2/2))/((Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width^2)/2-Roll Rate)*Tyre Vertical Rate))
Tyre Rate given Roll Rate of Suspension with Anti-Roll Bar
Go Tyre Vertical Rate = (Roll Rate*(Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width^2)/2))/((Roll Rate of Anti-Roll Bar+Wheel Centre Rate*(Spring Track Width^2)/2-Roll Rate)*(Rear Track Width^2)/2)
Spring Track Width given Roll Rate of Suspension with Anti-Roll Bar
Go Spring Track Width = sqrt(2*(((Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/((Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate))-Roll Rate of Anti-Roll Bar)/Wheel Centre Rate))
Vertical Tyre Axle Rate given Roll Rate of Suspension with Anti-Roll Bar
Go Wheel Centre Rate = ((Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate)-Roll Rate of Anti-Roll Bar)/((Spring Track Width^2)/2)
Roll Rate
Go Roll Rate = (Tyre Vertical Rate*(Rear Track Width^2)/2*Wheel Centre Rate*(Spring Track Width^2)/2)/(Tyre Vertical Rate*Rear Track Width^2/2+Wheel Centre Rate*Spring Track Width^2/2)
Rear Track Width given Roll Rate
Go Rear Track Width = sqrt((Roll Rate*Wheel Centre Rate*Spring Track Width^2)/((Wheel Centre Rate*(Spring Track Width^2)/2-Roll Rate)*Tyre Vertical Rate))
Spring Track Width given Roll Rate
Go Spring Track Width = sqrt((Roll Rate*Tyre Vertical Rate*Rear Track Width^2)/((Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate)*Wheel Centre Rate))
Tyre Rate given Roll Rate
Go Tyre Vertical Rate = (Roll Rate*(Wheel Centre Rate*(Spring Track Width^2)/2))/((Wheel Centre Rate*(Spring Track Width^2)/2-Roll Rate)*(Rear Track Width^2)/2)
Vertical Tyre Axle Rate given Roll Rate
Go Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2)

Vertical Tyre Axle Rate given Roll Rate Formula

Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2)
KW = (KΦ*Kt*(tR^2)/2)/(Kt*(tR^2)/2-KΦ*(Ts^2)/2)

How these calculations differ from those of Independent suspension?

Beam axle suspension has a slightly more complex approach to calculating the ride and roll rates due to springs not being located at the outboard track locations like an independent suspension system. Due to the springs being further inboard of the track, the spring rates are effectively softer in roll than the equivalent rates would be in an independent suspension system. Therefore the springs must be decoupled from ride and roll modes and we must look directly at the springs in their mounted position at the axle as opposed to using ideal ride and roll rates.

How to Calculate Vertical Tyre Axle Rate given Roll Rate?

Vertical Tyre Axle Rate given Roll Rate calculator uses Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2) to calculate the Wheel Centre Rate, The Vertical tyre axle rate given roll rate formula is used to find the vertical force acting on the tire axle per unit vertical displacement at the location along the spindle corresponding to the wheel centerline, measured relative to the chassis. Wheel Centre Rate is denoted by KW symbol.

How to calculate Vertical Tyre Axle Rate given Roll Rate using this online calculator? To use this online calculator for Vertical Tyre Axle Rate given Roll Rate, enter Roll Rate (KΦ), Tyre Vertical Rate (Kt), Rear Track Width (tR) & Spring Track Width (Ts) and hit the calculate button. Here is how the Vertical Tyre Axle Rate given Roll Rate calculation can be explained with given input values -> 11963.24 = (11805*321300*(1.5^2)/2)/(321300*(1.5^2)/2-11805*(0.9^2)/2).

FAQ

What is Vertical Tyre Axle Rate given Roll Rate?
The Vertical tyre axle rate given roll rate formula is used to find the vertical force acting on the tire axle per unit vertical displacement at the location along the spindle corresponding to the wheel centerline, measured relative to the chassis and is represented as KW = (KΦ*Kt*(tR^2)/2)/(Kt*(tR^2)/2-KΦ*(Ts^2)/2) or Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2). Roll Rate or Roll stiffness is the resistance moment generated per unit of roll angle of the sprung mass, Tyre Vertical Rate is the spring rate controlled by the tyre compound, sidewall stiffness and operating pressure, Rear Track Width is the distance between the centers of the rear wheels & Spring Track Width is the distance between the springs on either side of the axle.
How to calculate Vertical Tyre Axle Rate given Roll Rate?
The Vertical tyre axle rate given roll rate formula is used to find the vertical force acting on the tire axle per unit vertical displacement at the location along the spindle corresponding to the wheel centerline, measured relative to the chassis is calculated using Wheel Centre Rate = (Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate*(Spring Track Width^2)/2). To calculate Vertical Tyre Axle Rate given Roll Rate, you need Roll Rate (KΦ), Tyre Vertical Rate (Kt), Rear Track Width (tR) & Spring Track Width (Ts). With our tool, you need to enter the respective value for Roll Rate, Tyre Vertical Rate, Rear Track Width & Spring Track Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Wheel Centre Rate?
In this formula, Wheel Centre Rate uses Roll Rate, Tyre Vertical Rate, Rear Track Width & Spring Track Width. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Wheel Centre Rate = ((Roll Rate*Tyre Vertical Rate*(Rear Track Width^2)/2)/(Tyre Vertical Rate*(Rear Track Width^2)/2-Roll Rate)-Roll Rate of Anti-Roll Bar)/((Spring Track Width^2)/2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!