Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
V = (P/((G)^2*μviscosity))
This formula uses 4 Variables
Variables Used
Volume of Tank - (Measured in Cubic Meter) - Volume of tank is defined as the capacity of flocculation and mixing tank.
Power requirement - (Measured in Watt) - Power requirement is the amount of energy transferred or converted per unit time.
Mean velocity gradient - (Measured in 1 Per Second) - Mean velocity gradient is the difference in velocity between adjacent layers of the fluid.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.
STEP 1: Convert Input(s) to Base Unit
Power requirement: 3 Kilojoule per Second --> 3000 Watt (Check conversion here)
Mean velocity gradient: 2 1 Per Second --> 2 1 Per Second No Conversion Required
Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
V = (P/((G)^2*μviscosity)) --> (3000/((2)^2*1.02))
Evaluating ... ...
V = 735.294117647059
STEP 3: Convert Result to Output's Unit
735.294117647059 Cubic Meter --> No Conversion Required
FINAL ANSWER
735.294117647059 735.2941 Cubic Meter <-- Volume of Tank
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

19 Design of Rapid Mix Basin and Flocculation Basin Calculators

Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Mean Velocity Gradient given Power Requirement for Flocculation
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Mean Velocity Gradient given Power Requirement
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Flow Rate of Secondary Effluent given Volume of Flocculation Basin
Go Flow rate of secondary effluent = (Volume of Tank*Time in min per day)/Retention Time
Time in Minutes Per Day given Volume of Flocculation Basin
Go Time in min per day = (Retention Time*Flow rate of secondary effluent)/Volume of Tank
Retention Time given Volume of Flocculation Basin
Go Retention Time = (Volume of Tank*Time in min per day)/Flow rate of secondary effluent
Required Volume of Flocculation Basin
Go Volume of Tank = (Retention Time*Flow rate of secondary effluent)/Time in min per day
Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Power Requirement for Rapid Mixing Operations
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Volume of Flocculation Basin given power requirement for flocculation
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Power Requirement for Flocculation
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Volume of Mixing Tank given Mean Velocity Gradient
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Mean Velocity Gradient
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Power Requirement for Rapid Mixing Operations in Wastewater Treatment
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Power Requirement for Flocculation in Direct Filtration Process
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Power Requirement given Mean Velocity Gradient
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Hydraulic Retention Time given Volume of Rapid Mix Basin
Go Hydraulic Retention Time = Volume of Rapid mix Basin/Waste water flow
Wastewater Flow given Volume of Rapid Mix Basin
Go Waste water flow = Volume of Rapid mix Basin/Hydraulic Retention Time
Volume of Rapid Mix Basin
Go Volume of Rapid mix Basin = Hydraulic Retention Time*Waste water flow

Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations Formula

Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
V = (P/((G)^2*μviscosity))

What is mean velocity gradient ?

The difference in velocity between adjacent layers of the fluid is known as a velocity gradient and is given by v/x, where v is the velocity difference and x is the distance between the layers.

How to Calculate Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations?

Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations calculator uses Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity)) to calculate the Volume of Tank, The Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations calculates the volume of tank when we have prior information of power required , mean velocity gradient and dynamic viscosity. Volume of Tank is denoted by V symbol.

How to calculate Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations using this online calculator? To use this online calculator for Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations, enter Power requirement (P), Mean velocity gradient (G) & Dynamic Viscosity viscosity) and hit the calculate button. Here is how the Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations calculation can be explained with given input values -> 735.2941 = (3000/((2)^2*1.02)).

FAQ

What is Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations?
The Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations calculates the volume of tank when we have prior information of power required , mean velocity gradient and dynamic viscosity and is represented as V = (P/((G)^2*μviscosity)) or Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity)). Power requirement is the amount of energy transferred or converted per unit time, Mean velocity gradient is the difference in velocity between adjacent layers of the fluid & The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.
How to calculate Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations?
The Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations calculates the volume of tank when we have prior information of power required , mean velocity gradient and dynamic viscosity is calculated using Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity)). To calculate Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations, you need Power requirement (P), Mean velocity gradient (G) & Dynamic Viscosity viscosity). With our tool, you need to enter the respective value for Power requirement, Mean velocity gradient & Dynamic Viscosity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Volume of Tank?
In this formula, Volume of Tank uses Power requirement, Mean velocity gradient & Dynamic Viscosity. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
  • Volume of Tank = (Retention Time*Flow rate of secondary effluent)/Time in min per day
  • Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!