Weight of VSS given Weight of Oxygen Required Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen
VSSw = (VSS*2.3*Wi)/WO2
This formula uses 4 Variables
Variables Used
Volatile suspended solid weight - (Measured in Kilogram) - Volatile suspended solid weight means weight of the vss.
Volume of suspended solid - (Measured in Kilogram per Second) - Volume of suspended solid as mass flow rate.
Weight of initial oxygen - (Measured in Kilogram) - Weight of initial oxygen means the oxygen which is already present in the solution.
Weight of oxygen - (Measured in Kilogram) - Weight of oxygen required to destroy the Volatile suspended solids.
STEP 1: Convert Input(s) to Base Unit
Volume of suspended solid: 3 Kilogram per Day --> 3.47222222222222E-05 Kilogram per Second (Check conversion here)
Weight of initial oxygen: 2 Kilogram --> 2 Kilogram No Conversion Required
Weight of oxygen: 5 Kilogram --> 5 Kilogram No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
VSSw = (VSS*2.3*Wi)/WO2 --> (3.47222222222222E-05*2.3*2)/5
Evaluating ... ...
VSSw = 3.19444444444444E-05
STEP 3: Convert Result to Output's Unit
3.19444444444444E-05 Kilogram --> No Conversion Required
FINAL ANSWER
3.19444444444444E-05 3.2E-5 Kilogram <-- Volatile suspended solid weight
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

15 Design of an Aerobic Digester Calculators

Solids Retention Time given Volume of Aerobic Digester
Go Solids retention time = ((Influent average flow rate*Influent suspended solids)/(Volume of Aerobic Digester*Digester total suspended solids)-(Reaction rate constant*Volatile fraction))
Volume of Aerobic Digester
Go Volume of Aerobic Digester = (Influent average flow rate*Influent suspended solids)/(Digester total suspended solids*((Reaction rate constant*Volatile fraction)+Solids retention time))
Digester Total Suspended Solids given Volume of Aerobic Digester
Go Digester total suspended solids = (Influent average flow rate*Influent suspended solids)/(Volume of Aerobic Digester*(Reaction rate constant*Volatile fraction+Solids retention time))
Specific Gravity of Digested Sludge given Volume of Digested Sludge
Go Specific Gravity of Sludge = (Weight of sludge)/(Water Density*Sludge Volume*Percent Solids)
Density of Water given Volume of Digested Sludge
Go Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
Percent Solids given Volume of Digested Sludge
Go Percent Solids = (Weight of sludge)/(Sludge Volume*Water Density*Specific Gravity of Sludge)
Volume of Digested Sludge
Go Sludge Volume = (Weight of sludge)/(Water Density*Specific Gravity of Sludge*Percent Solids)
Weight of Sludge given Volume of Digested Sludge
Go Weight of sludge = (Water Density*Sludge Volume*Specific Gravity of Sludge*Percent Solids)
Initial Weight of Oxygen given Weight of Oxygen Required
Go Weight of initial oxygen = (Weight of oxygen*Volatile suspended solid weight)/(Volume of suspended solid*2.3)
VSS as Mass Flow Rate given Weight of Oxygen Required
Go Volume of suspended solid = (Weight of oxygen*Volatile suspended solid weight)/(2.3*Weight of initial oxygen)
Weight of VSS given Weight of Oxygen Required
Go Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen
Weight of Oxygen Required to Destroy VSS
Go Weight of oxygen = (Volume of suspended solid*2.3*Weight of initial oxygen)/Volatile suspended solid weight
Volume of Air Required at Standard Conditions
Go Volume of Air = (Weight of oxygen)/(Density of Air*0.232)
Density of Air given Volume of Air Required
Go Density of Air = (Weight of oxygen)/(Volume of Air*0.232)
Weight of Oxygen given Volume of Air
Go Weight of oxygen = (Volume of Air*Density of Air*0.232)

Weight of VSS given Weight of Oxygen Required Formula

Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen
VSSw = (VSS*2.3*Wi)/WO2

What is vss method ?

The volatile suspended solids (VSS) method is a rough measure of solids concentration in samples of activated sludge derived by measuring volatile solids. Because bacteria are mostly organic, the VSS test is a better indicator of organic-solids concentrations and therefore, the amount of bacteria in a sample.

How to Calculate Weight of VSS given Weight of Oxygen Required?

Weight of VSS given Weight of Oxygen Required calculator uses Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen to calculate the Volatile suspended solid weight, The Weight of VSS given Weight of Oxygen Required calculates the weight of volatile suspended solids when we have prior information of vss as mass flow rate and weight of oxygen. Volatile suspended solid weight is denoted by VSSw symbol.

How to calculate Weight of VSS given Weight of Oxygen Required using this online calculator? To use this online calculator for Weight of VSS given Weight of Oxygen Required, enter Volume of suspended solid (VSS), Weight of initial oxygen (Wi) & Weight of oxygen (WO2) and hit the calculate button. Here is how the Weight of VSS given Weight of Oxygen Required calculation can be explained with given input values -> 3.2E-5 = (3.47222222222222E-05*2.3*2)/5.

FAQ

What is Weight of VSS given Weight of Oxygen Required?
The Weight of VSS given Weight of Oxygen Required calculates the weight of volatile suspended solids when we have prior information of vss as mass flow rate and weight of oxygen and is represented as VSSw = (VSS*2.3*Wi)/WO2 or Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen. Volume of suspended solid as mass flow rate, Weight of initial oxygen means the oxygen which is already present in the solution & Weight of oxygen required to destroy the Volatile suspended solids.
How to calculate Weight of VSS given Weight of Oxygen Required?
The Weight of VSS given Weight of Oxygen Required calculates the weight of volatile suspended solids when we have prior information of vss as mass flow rate and weight of oxygen is calculated using Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen. To calculate Weight of VSS given Weight of Oxygen Required, you need Volume of suspended solid (VSS), Weight of initial oxygen (Wi) & Weight of oxygen (WO2). With our tool, you need to enter the respective value for Volume of suspended solid, Weight of initial oxygen & Weight of oxygen and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!