Work done by Compressor given Load on Condenser Solution

STEP 0: Pre-Calculation Summary
Formula Used
Compressor work done = Load on Condenser-Refrigeration Capacity
W = QC-RE
This formula uses 3 Variables
Variables Used
Compressor work done - (Measured in Joule per Second) - Compressor work done is the work done by the compressor.
Load on Condenser - (Measured in Joule per Second) - The Load on condenser is the amount of heat that must be removed from the inlet stream to attain the specified removal efficiency.
Refrigeration Capacity - (Measured in Joule per Second) - Refrigeration capacity is a measure of the effective cooling capacity of a refrigerator.
STEP 1: Convert Input(s) to Base Unit
Load on Condenser: 1600 Joule per Minute --> 26.6666666666667 Joule per Second (Check conversion here)
Refrigeration Capacity: 1000 Joule per Minute --> 16.6666666666667 Joule per Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
W = QC-RE --> 26.6666666666667-16.6666666666667
Evaluating ... ...
W = 10
STEP 3: Convert Result to Output's Unit
10 Joule per Second -->600 Joule per Minute (Check conversion here)
FINAL ANSWER
600 Joule per Minute <-- Compressor work done
(Calculation completed in 00.004 seconds)

Credits

Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune
Abhishek Dharmendra Bansile has created this Calculator and 100+ more calculators!
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

5 Condensers Calculators

Heat Rejection Factor
Go Heat Rejection Factor = (Refrigeration Capacity+Compressor work done)/Refrigeration Capacity
Work done by Compressor given Load on Condenser
Go Compressor work done = Load on Condenser-Refrigeration Capacity
Refrigeration Capacity given Load on Condenser
Go Refrigeration Capacity = Load on Condenser-Compressor work done
Load on Condenser
Go Load on Condenser = Refrigeration Capacity+Compressor work done
Heat Rejection Factor given COP
Go Heat Rejection Factor = 1+(1/Coefficient of Performance of Refrigerator)

Work done by Compressor given Load on Condenser Formula

Compressor work done = Load on Condenser-Refrigeration Capacity
W = QC-RE

What is the function of a condenser?

There are three very important functions the condenser performs in keeping your air conditioner performing its best. These include rejecting superheated refrigerant gas, condensation, and subcooling refrigerant once it is transformed back into a liquid state.

How to Calculate Work done by Compressor given Load on Condenser?

Work done by Compressor given Load on Condenser calculator uses Compressor work done = Load on Condenser-Refrigeration Capacity to calculate the Compressor work done, The Work done by Compressor given Load on Condenser formula is defined as the work done by the compressor and it is obtained by subtracting refrigeration capacity from the load on the condenser. Compressor work done is denoted by W symbol.

How to calculate Work done by Compressor given Load on Condenser using this online calculator? To use this online calculator for Work done by Compressor given Load on Condenser, enter Load on Condenser (QC) & Refrigeration Capacity (RE) and hit the calculate button. Here is how the Work done by Compressor given Load on Condenser calculation can be explained with given input values -> 36000 = 26.6666666666667-16.6666666666667.

FAQ

What is Work done by Compressor given Load on Condenser?
The Work done by Compressor given Load on Condenser formula is defined as the work done by the compressor and it is obtained by subtracting refrigeration capacity from the load on the condenser and is represented as W = QC-RE or Compressor work done = Load on Condenser-Refrigeration Capacity. The Load on condenser is the amount of heat that must be removed from the inlet stream to attain the specified removal efficiency & Refrigeration capacity is a measure of the effective cooling capacity of a refrigerator.
How to calculate Work done by Compressor given Load on Condenser?
The Work done by Compressor given Load on Condenser formula is defined as the work done by the compressor and it is obtained by subtracting refrigeration capacity from the load on the condenser is calculated using Compressor work done = Load on Condenser-Refrigeration Capacity. To calculate Work done by Compressor given Load on Condenser, you need Load on Condenser (QC) & Refrigeration Capacity (RE). With our tool, you need to enter the respective value for Load on Condenser & Refrigeration Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!