Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
σy = fs*sqrt(1/2*((σ1-σ2)^2+(σ2-σ3)^2+(σ3-σ1)^2))
This formula uses 1 Functions, 5 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Tensile Yield Strength - (Measured in Pascal) - Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
First Principal Stress - (Measured in Pascal) - First Principal Stress is the first one among the two or three principal stresses acting on a biaxial or triaxial stressed component.
Second Principal Stress - (Measured in Pascal) - Second Principal Stress is the second one among the two or three principal stresses acting on a biaxial or triaxial stressed component.
Third Principal Stress - (Measured in Pascal) - Third Principal Stress is the third one among the two or three principal stresses acting on a biaxial or triaxial stressed component.
STEP 1: Convert Input(s) to Base Unit
Factor of Safety: 2 --> No Conversion Required
First Principal Stress: 35 Newton per Square Millimeter --> 35000000 Pascal (Check conversion here)
Second Principal Stress: 47 Newton per Square Millimeter --> 47000000 Pascal (Check conversion here)
Third Principal Stress: 65 Newton per Square Millimeter --> 65000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σy = fs*sqrt(1/2*((σ12)^2+(σ23)^2+(σ31)^2)) --> 2*sqrt(1/2*((35000000-47000000)^2+(47000000-65000000)^2+(65000000-35000000)^2))
Evaluating ... ...
σy = 52306787.3224881
STEP 3: Convert Result to Output's Unit
52306787.3224881 Pascal -->52.3067873224881 Newton per Square Millimeter (Check conversion here)
FINAL ANSWER
52.3067873224881 52.30679 Newton per Square Millimeter <-- Tensile Yield Strength
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

13 Distortion Energy Theory Calculators

Distortion Strain Energy
Go Strain Energy for Distortion = ((1+Poisson's Ratio))/(6*Young's Modulus of Specimen)*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2)
Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety
Go Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
Tensile Yield Strength by Distortion Energy Theorem
Go Tensile Yield Strength = sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety
Go Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress)
Strain Energy due to Change in Volume given Principal Stresses
Go Strain Energy for Volume Change = ((1-2*Poisson's Ratio))/(6*Young's Modulus of Specimen)*(First Principal Stress+Second Principal Stress+Third Principal Stress)^2
Strain Energy due to Change in Volume with No Distortion
Go Strain Energy for Volume Change = 3/2*((1-2*Poisson's Ratio)*Stress for Volume Change^2)/Young's Modulus of Specimen
Distortion Strain Energy for Yielding
Go Strain Energy for Distortion = ((1+Poisson's Ratio))/(3*Young's Modulus of Specimen)*Tensile Yield Strength^2
Volumetric Strain with No Distortion
Go Strain for Volume Change = ((1-2*Poisson's Ratio)*Stress for Volume Change)/Young's Modulus of Specimen
Stress due to Change in Volume with No Distortion
Go Stress for Volume Change = (First Principal Stress+Second Principal Stress+Third Principal Stress)/3
Total Strain Energy per Unit Volume
Go Total Strain Energy per Unit Volume = Strain Energy for Distortion+Strain Energy for Volume Change
Strain Energy due to Change in Volume given Volumetric Stress
Go Strain Energy for Volume Change = 3/2*Stress for Volume Change*Strain for Volume Change
Shear Yield Strength by Maximum Distortion Energy Theorem
Go Shear Yield Strength = 0.577*Tensile Yield Strength
Shear Yield Strength by Maximum Distortion Energy Theory
Go Shear Yield Strength = 0.577*Tensile Yield Strength

Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety Formula

Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
σy = fs*sqrt(1/2*((σ1-σ2)^2+(σ2-σ3)^2+(σ3-σ1)^2))

What is strain energy?

Strain energy is defined as the energy stored in a body due to deformation. The strain energy per unit volume is known as strain energy density and the area under the stress-strain curve towards the point of deformation. When the applied force is released, the whole system returns to its original shape. It is usually denoted by U.

How to Calculate Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety?

Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety calculator uses Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2)) to calculate the Tensile Yield Strength, Tensile yield strength by distortion energy theorem considering factor of safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions. Tensile Yield Strength is denoted by σy symbol.

How to calculate Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety using this online calculator? To use this online calculator for Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety, enter Factor of Safety (fs), First Principal Stress 1), Second Principal Stress 2) & Third Principal Stress 3) and hit the calculate button. Here is how the Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety calculation can be explained with given input values -> 5.2E-5 = 2*sqrt(1/2*((35000000-47000000)^2+(47000000-65000000)^2+(65000000-35000000)^2)).

FAQ

What is Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety?
Tensile yield strength by distortion energy theorem considering factor of safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions and is represented as σy = fs*sqrt(1/2*((σ12)^2+(σ23)^2+(σ31)^2)) or Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2)). Factor of Safety expresses how much stronger a system is than it needs to be for an intended load, First Principal Stress is the first one among the two or three principal stresses acting on a biaxial or triaxial stressed component, Second Principal Stress is the second one among the two or three principal stresses acting on a biaxial or triaxial stressed component & Third Principal Stress is the third one among the two or three principal stresses acting on a biaxial or triaxial stressed component.
How to calculate Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety?
Tensile yield strength by distortion energy theorem considering factor of safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions is calculated using Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2)). To calculate Tensile Yield Strength by Distortion Energy Theorem Considering Factor of Safety, you need Factor of Safety (fs), First Principal Stress 1), Second Principal Stress 2) & Third Principal Stress 3). With our tool, you need to enter the respective value for Factor of Safety, First Principal Stress, Second Principal Stress & Third Principal Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Tensile Yield Strength?
In this formula, Tensile Yield Strength uses Factor of Safety, First Principal Stress, Second Principal Stress & Third Principal Stress. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Tensile Yield Strength = sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
  • Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!